"htmlcode">
item_id int, created_time datetime, modified_time datetime, item_name varchar(20), other varchar(20)
要求：
1.源表中有100万条数据，其中有50万created_time和item_name重复。
2.要把去重后的50万数据写入到目标表。
3.重复created_time和item_name的多条数据，可以保留任意一条，不做规则限制。
"htmlcode">
-- 建立源表
create table t_source
( item_id int,
created_time datetime,
modified_time datetime,
item_name varchar(20),
other varchar(20)
);
-- 建立目标表
create table t_target like t_source;
-- 生成100万测试数据，其中有50万created_time和item_name重复
delimiter //
create procedure sp_generate_data()
begin
set @i := 1;
while @i<=500000 do
set @created_time := date_add('2017-01-01',interval @i second);
set @modified_time := @created_time;
set @item_name := concat('a',@i);
insert into t_source
values (@i,@created_time,@modified_time,@item_name,'other');
set @i:=@i+1;
end while;
commit;
set @last_insert_id := 500000;
insert into t_source
select item_id + @last_insert_id,
created_time,
date_add(modified_time,interval @last_insert_id second),
item_name,
'other'
from t_source;
commit;
end
//
delimiter ;
call sp_generate_data();
-- 源表没有主键或唯一性约束，有可能存在两条完全一样的数据，所以再插入一条记录模拟这种情况。
insert into t_source select * from t_source where item_id=1;
源表中有1000001条记录，去重后的目标表应该有500000条记录。
mysql> select count(*),count(distinct created_time,item_name) from t_source;
+----------+----------------------------------------+
| count(*) | count(distinct created_time,item_name) |
+----------+----------------------------------------+
| 1000001 | 500000 |
+----------+----------------------------------------+
1 row in set (1.92 sec)
一、巧用索引与变量
1. 无索引对比测试
（1）使用相关子查询
truncate t_target; insert into t_target select distinct t1.* from t_source t1 where item_id in (select min(item_id) from t_source t2 where t1.created_time=t2.created_time and t1.item_name=t2.item_name);
这个语句很长时间都出不来结果，只看一下执行计划吧。
mysql> explain select distinct t1.* from t_source t1 where item_id in -> (select min(item_id) from t_source t2 where t1.created_time=t2.created_time and t1.item_name=t2.item_name); +----+--------------------+-------+------------+------+---------------+------+---------+------+--------+----------+------------------------------+ | id | select_type | table | partitions | type | possible_keys | key | key_len | ref | rows | filtered | Extra | +----+--------------------+-------+------------+------+---------------+------+---------+------+--------+----------+------------------------------+ | 1 | PRIMARY | t1 | NULL | ALL | NULL | NULL | NULL | NULL | 997282 | 100.00 | Using where; Using temporary | | 2 | DEPENDENT SUBQUERY | t2 | NULL | ALL | NULL | NULL | NULL | NULL | 997282 | 1.00 | Using where | +----+--------------------+-------+------------+------+---------------+------+---------+------+--------+----------+------------------------------+ 2 rows in set, 3 warnings (0.00 sec)
主查询和相关子查询都是全表扫描，一共要扫描100万*100万数据行，难怪出不来结果。
（2）使用表连接
truncate t_target; insert into t_target select distinct t1.* from t_source t1, (select min(item_id) item_id,created_time,item_name from t_source group by created_time,item_name) t2 where t1.item_id = t2.item_id;
这种方法用时14秒，查询计划如下：
mysql> explain select distinct t1.* from t_source t1, (select min(item_id) item_id,created_time,item_name from t_source group by created_time,item_name) t2 where t1.item_id = t2.item_id; +----+-------------+------------+------------+------+---------------+-------------+---------+-----------------+--------+----------+------------------------------+ | id | select_type | table | partitions | type | possible_keys | key | key_len | ref | rows | filtered | Extra | +----+-------------+------------+------------+------+---------------+-------------+---------+-----------------+--------+----------+------------------------------+ | 1 | PRIMARY | t1 | NULL | ALL | NULL | NULL | NULL | NULL | 997282 | 100.00 | Using where; Using temporary | | 1 | PRIMARY | <derived2> | NULL | ref | <auto_key0> | <auto_key0> | 5 | test.t1.item_id | 10 | 100.00 | Distinct | | 2 | DERIVED | t_source | NULL | ALL | NULL | NULL | NULL | NULL | 997282 | 100.00 | Using temporary | +----+-------------+------------+------------+------+---------------+-------------+---------+-----------------+--------+----------+------------------------------+ 3 rows in set, 1 warning (0.00 sec)
"htmlcode">
set @a:='1000-01-01 00:00:00'; set @b:=' '; set @f:=0; truncate t_target; insert into t_target select item_id,created_time,modified_time,item_name,other from (select t0.*,if(@a=created_time and @b=item_name,@f:=0,@f:=1) f, @a:=created_time,@b:=item_name from (select * from t_source order by created_time,item_name) t0) t1 where f=1;
这种方法用时13秒，查询计划如下：
mysql> explain select item_id,created_time,modified_time,item_name,other -> from -> (select t0.*,if(@a=created_time and @b=item_name,@f:=0,@f:=1) f, @a:=created_time,@b:=item_name -> from -> (select * from t_source order by created_time,item_name) t0) t1 where f=1; +----+-------------+------------+------------+------+---------------+-------------+---------+-------+--------+----------+----------------+ | id | select_type | table | partitions | type | possible_keys | key | key_len | ref | rows | filtered | Extra | +----+-------------+------------+------------+------+---------------+-------------+---------+-------+--------+----------+----------------+ | 1 | PRIMARY | <derived2> | NULL | ref | <auto_key0> | <auto_key0> | 4 | const | 10 | 100.00 | NULL | | 2 | DERIVED | <derived3> | NULL | ALL | NULL | NULL | NULL | NULL | 997282 | 100.00 | NULL | | 3 | DERIVED | t_source | NULL | ALL | NULL | NULL | NULL | NULL | 997282 | 100.00 | Using filesort | +----+-------------+------------+------------+------+---------------+-------------+---------+-------+--------+----------+----------------+ 3 rows in set, 5 warnings (0.00 sec)
"htmlcode">
-- 建立created_time和item_name字段的联合索引 create index idx_sort on t_source(created_time,item_name,item_id); analyze table t_source;
（1）使用相关子查询
truncate t_target; insert into t_target select distinct t1.* from t_source t1 where item_id in (select min(item_id) from t_source t2 where t1.created_time=t2.created_time and t1.item_name=t2.item_name);
本次用时19秒，查询计划如下：
mysql> explain select distinct t1.* from t_source t1 where item_id in -> (select min(item_id) from t_source t2 where t1.created_time=t2.created_time and t1.item_name=t2.item_name); +----+--------------------+-------+------------+------+---------------+----------+---------+----------------------------------------+--------+----------+------------------------------+ | id | select_type | table | partitions | type | possible_keys | key | key_len | ref | rows | filtered | Extra | +----+--------------------+-------+------------+------+---------------+----------+---------+----------------------------------------+--------+----------+------------------------------+ | 1 | PRIMARY | t1 | NULL | ALL | NULL | NULL | NULL | NULL | 997281 | 100.00 | Using where; Using temporary | | 2 | DEPENDENT SUBQUERY | t2 | NULL | ref | idx_sort | idx_sort | 89 | test.t1.created_time,test.t1.item_name | 2 | 100.00 | Using index | +----+--------------------+-------+------------+------+---------------+----------+---------+----------------------------------------+--------+----------+------------------------------+ 2 rows in set, 3 warnings (0.00 sec)
"htmlcode">
truncate t_target; insert into t_target select distinct t1.* from t_source t1, (select min(item_id) item_id,created_time,item_name from t_source group by created_time,item_name) t2 where t1.item_id = t2.item_id;
本次用时13秒，查询计划如下：
mysql> explain select distinct t1.* from t_source t1, -> (select min(item_id) item_id,created_time,item_name from t_source group by created_time,item_name) t2 -> where t1.item_id = t2.item_id; +----+-------------+------------+------------+-------+---------------+-------------+---------+-----------------+--------+----------+------------------------------+ | id | select_type | table | partitions | type | possible_keys | key | key_len | ref | rows | filtered | Extra | +----+-------------+------------+------------+-------+---------------+-------------+---------+-----------------+--------+----------+------------------------------+ | 1 | PRIMARY | t1 | NULL | ALL | NULL | NULL | NULL | NULL | 997281 | 100.00 | Using where; Using temporary | | 1 | PRIMARY | <derived2> | NULL | ref | <auto_key0> | <auto_key0> | 5 | test.t1.item_id | 10 | 100.00 | Distinct | | 2 | DERIVED | t_source | NULL | index | idx_sort | idx_sort | 94 | NULL | 997281 | 100.00 | Using index | +----+-------------+------------+------------+-------+---------------+-------------+---------+-----------------+--------+----------+------------------------------+ 3 rows in set, 1 warning (0.00 sec)
和没有索引相比，子查询虽然从全表扫描变为了全索引扫描，但还是需要扫描100万行记录。因此查询性能提升并不是明显。
（3）使用变量
set @a:='1000-01-01 00:00:00'; set @b:=' '; set @f:=0; truncate t_target; insert into t_target select item_id,created_time,modified_time,item_name,other from (select t0.*,if(@a=created_time and @b=item_name,@f:=0,@f:=1) f, @a:=created_time,@b:=item_name from (select * from t_source order by created_time,item_name) t0) t1 where f=1;
本次用时13秒，查询计划与没有索引时的完全相同。可见索引对这种写法没有作用。能不能消除嵌套，只用一层查询出结果呢？
（4）使用变量，并且消除嵌套查询
set @a:='1000-01-01 00:00:00'; set @b:=' '; truncate t_target; insert into t_target select * from t_source force index (idx_sort) where (@a!=created_time or @b!=item_name) and (@a:=created_time) is not null and (@b:=item_name) is not null order by created_time,item_name;
本次用时12秒，查询计划如下：
mysql> explain select * from t_source force index (idx_sort) -> where (@a!=created_time or @b!=item_name) and (@a:=created_time) is not null and (@b:=item_name) is not null -> order by created_time,item_name; +----+-------------+----------+------------+-------+---------------+----------+---------+------+--------+----------+-------------+ | id | select_type | table | partitions | type | possible_keys | key | key_len | ref | rows | filtered | Extra | +----+-------------+----------+------------+-------+---------------+----------+---------+------+--------+----------+-------------+ | 1 | SIMPLE | t_source | NULL | index | NULL | idx_sort | 94 | NULL | 997281 | 99.00 | Using where | +----+-------------+----------+------------+-------+---------------+----------+---------+------+--------+----------+-------------+ 1 row in set, 3 warnings (0.00 sec)
该语句具有以下特点：
"color: #ff0000">二、利用窗口函数
MySQL 8中新增的窗口函数使得原来麻烦的去重操作变得很简单。
truncate t_target; insert into t_target select item_id, created_time, modified_time, item_name, other from (select *, row_number() over(partition by created_time,item_name) as rn from t_source) t where rn=1;
这个语句执行只需要12秒，而且写法清晰易懂，其查询计划如下：
mysql> explain select item_id, created_time, modified_time, item_name, other -> from (select *, row_number() over(partition by created_time,item_name) as rn -> from t_source) t where rn=1; +----+-------------+------------+------------+------+---------------+-------------+---------+-------+--------+----------+----------------+ | id | select_type | table | partitions | type | possible_keys | key | key_len | ref | rows | filtered | Extra | +----+-------------+------------+------------+------+---------------+-------------+---------+-------+--------+----------+----------------+ | 1 | PRIMARY | <derived2> | NULL | ref | <auto_key0> | <auto_key0> | 8 | const | 10 | 100.00 | NULL | | 2 | DERIVED | t_source | NULL | ALL | NULL | NULL | NULL | NULL | 997281 | 100.00 | Using filesort | +----+-------------+------------+------------+------+---------------+-------------+---------+-------+--------+----------+----------------+ 2 rows in set, 2 warnings (0.00 sec)
该查询对t_source表进行了一次全表扫描，同时用filesort对表按分区字段created_time、item_name进行了排序。外层查询从每个分区中保留一条数据。因为重复created_time和item_name的多条数据中可以保留任意一条，所以oevr中不需要使用order by子句。
从执行计划看，窗口函数去重语句似乎没有消除嵌套查询的变量去重好，但此方法实际执行是最快的。
MySQL窗口函数说明参见“https://dev.mysql.com/doc/refman/8.0/en/window-functions.html”。
三、多线程并行执行
前面已经将单条查重语句调整到最优，但还是以单线程方式执行。能否利用多处理器，让去重操作多线程并行执行，从而进一步提高速度呢？比如我的实验环境是4处理器，如果使用4个线程同时执行查重SQL，理论上应该接近4倍的性能提升。
1. 数据分片
在生成测试数据时，created_time采用每条记录加一秒的方式，也就是最大和在最小的时间差为50万秒，而且数据均匀分布，因此先把数据平均分成4份。
（1）查询出4份数据的created_time边界值
mysql> select date_add('2017-01-01',interval 125000 second) dt1,
-> date_add('2017-01-01',interval 2*125000 second) dt2,
-> date_add('2017-01-01',interval 3*125000 second) dt3,
-> max(created_time) dt4
-> from t_source;
+---------------------+---------------------+---------------------+---------------------+
| dt1 | dt2 | dt3 | dt4 |
+---------------------+---------------------+---------------------+---------------------+
| 2017-01-02 10:43:20 | 2017-01-03 21:26:40 | 2017-01-05 08:10:00 | 2017-01-06 18:53:20 |
+---------------------+---------------------+---------------------+---------------------+
1 row in set (0.00 sec)
（2）查看每份数据的记录数，确认数据平均分布
mysql> select case when created_time >= '2017-01-01' -> and created_time < '2017-01-02 10:43:20' -> then '2017-01-01' -> when created_time >= '2017-01-02 10:43:20' -> and created_time < '2017-01-03 21:26:40' -> then '2017-01-02 10:43:20' -> when created_time >= '2017-01-03 21:26:40' -> and created_time < '2017-01-05 08:10:00' -> then '2017-01-03 21:26:40' -> else '2017-01-05 08:10:00' -> end min_dt, -> case when created_time >= '2017-01-01' -> and created_time < '2017-01-02 10:43:20' -> then '2017-01-02 10:43:20' -> when created_time >= '2017-01-02 10:43:20' -> and created_time < '2017-01-03 21:26:40' -> then '2017-01-03 21:26:40' -> when created_time >= '2017-01-03 21:26:40' -> and created_time < '2017-01-05 08:10:00' -> then '2017-01-05 08:10:00' -> else '2017-01-06 18:53:20' -> end max_dt, -> count(*) -> from t_source -> group by case when created_time >= '2017-01-01' -> and created_time < '2017-01-02 10:43:20' -> then '2017-01-01' -> when created_time >= '2017-01-02 10:43:20' -> and created_time < '2017-01-03 21:26:40' -> then '2017-01-02 10:43:20' -> when created_time >= '2017-01-03 21:26:40' -> and created_time < '2017-01-05 08:10:00' -> then '2017-01-03 21:26:40' -> else '2017-01-05 08:10:00' -> end, -> case when created_time >= '2017-01-01' -> and created_time < '2017-01-02 10:43:20' -> then '2017-01-02 10:43:20' -> when created_time >= '2017-01-02 10:43:20' -> and created_time < '2017-01-03 21:26:40' -> then '2017-01-03 21:26:40' -> when created_time >= '2017-01-03 21:26:40' -> and created_time < '2017-01-05 08:10:00' -> then '2017-01-05 08:10:00' -> else '2017-01-06 18:53:20' -> end; +---------------------+---------------------+----------+ | min_dt | max_dt | count(*) | +---------------------+---------------------+----------+ | 2017-01-01 | 2017-01-02 10:43:20 | 249999 | | 2017-01-02 10:43:20 | 2017-01-03 21:26:40 | 250000 | | 2017-01-03 21:26:40 | 2017-01-05 08:10:00 | 250000 | | 2017-01-05 08:10:00 | 2017-01-06 18:53:20 | 250002 | +---------------------+---------------------+----------+ 4 rows in set (4.86 sec)
4份数据的并集应该覆盖整个源数据集，并且数据之间是不重复的。也就是说4份数据的created_time要连续且互斥，连续保证处理全部数据，互斥确保了不需要二次查重。实际上这和时间范围分区的概念类似，或许用分区表更好些，只是这里省略了重建表的步骤。
2. 建立查重的存储过程
有了以上信息我们就可以写出4条语句处理全部数据。为了调用接口尽量简单，建立下面的存储过程。
delimiter //
create procedure sp_unique(i smallint)
begin
set @a:='1000-01-01 00:00:00';
set @b:=' ';
if (i<4) then
insert into t_target
select * from t_source force index (idx_sort)
where created_time >= date_add('2017-01-01',interval (i-1)*125000 second)
and created_time < date_add('2017-01-01',interval i*125000 second)
and (@a!=created_time or @b!=item_name)
and (@a:=created_time) is not null
and (@b:=item_name) is not null
order by created_time,item_name;
else
insert into t_target
select * from t_source force index (idx_sort)
where created_time >= date_add('2017-01-01',interval (i-1)*125000 second)
and created_time <= date_add('2017-01-01',interval i*125000 second)
and (@a!=created_time or @b!=item_name)
and (@a:=created_time) is not null
and (@b:=item_name) is not null
order by created_time,item_name;
end if;
end
//
查询语句的执行计划如下：
mysql> explain select * from t_source force index (idx_sort)
-> where created_time >= date_add('2017-01-01',interval (1-1)*125000 second)
-> and created_time < date_add('2017-01-01',interval 1*125000 second)
-> and (@a!=created_time or @b!=item_name)
-> and (@a:=created_time) is not null
-> and (@b:=item_name) is not null
-> order by created_time,item_name;
+----+-------------+----------+------------+-------+---------------+----------+---------+------+--------+----------+-----------------------+
| id | select_type | table | partitions | type | possible_keys | key | key_len | ref | rows | filtered | Extra |
+----+-------------+----------+------------+-------+---------------+----------+---------+------+--------+----------+-----------------------+
| 1 | SIMPLE | t_source | NULL | range | idx_sort | idx_sort | 6 | NULL | 498640 | 100.00 | Using index condition |
+----+-------------+----------+------------+-------+---------------+----------+---------+------+--------+----------+-----------------------+
1 row in set, 3 warnings (0.00 sec)
MySQL优化器进行索引范围扫描，并且使用索引条件下推（ICP）优化查询。
3. 并行执行
下面分别使用shell后台进程和MySQL Schedule Event实现并行。
（1）shell后台进程
"htmlcode">
#!/bin/bash
mysql -vvv -u root -p123456 test -e "truncate t_target" &>/dev/null
date '+%H:%M:%S'
for y in {1..4}
do
sql="call sp_unique($y)"
mysql -vvv -u root -p123456 test -e "$sql" &>par_sql1_$y.log &
done
wait
date '+%H:%M:%S'
"htmlcode">
[mysql@hdp2~]$./duplicate_removal.sh 14:27:30 14:27:35
这种方法用时5秒，并行执行的4个过程调用分别用时为4.87秒、4.88秒、4.91秒、4.73秒：
[mysql@hdp2~]$cat par_sql1_1.log | sed '/^$/d' mysql: [Warning] Using a password on the command line interface can be insecure. -------------- call sp_unique(1) -------------- Query OK, 124999 rows affected (4.87 sec) Bye [mysql@hdp2~]$cat par_sql1_2.log | sed '/^$/d' mysql: [Warning] Using a password on the command line interface can be insecure. -------------- call sp_unique(2) -------------- Query OK, 125000 rows affected (4.88 sec) Bye [mysql@hdp2~]$cat par_sql1_3.log | sed '/^$/d' mysql: [Warning] Using a password on the command line interface can be insecure. -------------- call sp_unique(3) -------------- Query OK, 125000 rows affected (4.91 sec) Bye [mysql@hdp2~]$cat par_sql1_4.log | sed '/^$/d' mysql: [Warning] Using a password on the command line interface can be insecure. -------------- call sp_unique(4) -------------- Query OK, 125001 rows affected (4.73 sec) Bye [mysql@hdp2~]$
可以看到，每个过程的执行时间均4.85，因为是并行执行，总的过程执行时间为最慢的4.91秒，比单线程速度提高了2.5倍。
（2）MySQL Schedule Event
"htmlcode">
-- 用于查看事件执行时间等信息 create table t_event_history ( dbname varchar(128) not null default '', eventname varchar(128) not null default '', starttime datetime(3) not null default '1000-01-01 00:00:00', endtime datetime(3) default null, issuccess int(11) default null, duration int(11) default null, errormessage varchar(512) default null, randno int(11) default null );
"htmlcode">
delimiter //
create event ev1 on schedule at current_timestamp + interval 1 hour on completion preserve disable do
begin
declare r_code char(5) default '00000';
declare r_msg text;
declare v_error integer;
declare v_starttime datetime default now(3);
declare v_randno integer default floor(rand()*100001);
insert into t_event_history (dbname,eventname,starttime,randno)
#作业名
values(database(),'ev1', v_starttime,v_randno);
begin
#异常处理段
declare continue handler for sqlexception
begin
set v_error = 1;
get diagnostics condition 1 r_code = returned_sqlstate , r_msg = message_text;
end;
#此处为实际调用的用户程序过程
call sp_unique(1);
end;
update t_event_history set endtime=now(3),issuccess=isnull(v_error),duration=timestampdiff(microsecond,starttime,now(3)), errormessage=concat('error=',r_code,', message=',r_msg),randno=null where starttime=v_starttime and randno=v_randno;
end
//
create event ev2 on schedule at current_timestamp + interval 1 hour on completion preserve disable do
begin
declare r_code char(5) default '00000';
declare r_msg text;
declare v_error integer;
declare v_starttime datetime default now(3);
declare v_randno integer default floor(rand()*100001);
insert into t_event_history (dbname,eventname,starttime,randno)
#作业名
values(database(),'ev2', v_starttime,v_randno);
begin
#异常处理段
declare continue handler for sqlexception
begin
set v_error = 1;
get diagnostics condition 1 r_code = returned_sqlstate , r_msg = message_text;
end;
#此处为实际调用的用户程序过程
call sp_unique(2);
end;
update t_event_history set endtime=now(3),issuccess=isnull(v_error),duration=timestampdiff(microsecond,starttime,now(3)), errormessage=concat('error=',r_code,', message=',r_msg),randno=null where starttime=v_starttime and randno=v_randno;
end
//
create event ev3 on schedule at current_timestamp + interval 1 hour on completion preserve disable do
begin
declare r_code char(5) default '00000';
declare r_msg text;
declare v_error integer;
declare v_starttime datetime default now(3);
declare v_randno integer default floor(rand()*100001);
insert into t_event_history (dbname,eventname,starttime,randno)
#作业名
values(database(),'ev3', v_starttime,v_randno);
begin
#异常处理段
declare continue handler for sqlexception
begin
set v_error = 1;
get diagnostics condition 1 r_code = returned_sqlstate , r_msg = message_text;
end;
#此处为实际调用的用户程序过程
call sp_unique(3);
end;
update t_event_history set endtime=now(3),issuccess=isnull(v_error),duration=timestampdiff(microsecond,starttime,now(3)), errormessage=concat('error=',r_code,', message=',r_msg),randno=null where starttime=v_starttime and randno=v_randno;
end
//
create event ev4 on schedule at current_timestamp + interval 1 hour on completion preserve disable do
begin
declare r_code char(5) default '00000';
declare r_msg text;
declare v_error integer;
declare v_starttime datetime default now(3);
declare v_randno integer default floor(rand()*100001);
insert into t_event_history (dbname,eventname,starttime,randno)
#作业名
values(database(),'ev4', v_starttime,v_randno);
begin
#异常处理段
declare continue handler for sqlexception
begin
set v_error = 1;
get diagnostics condition 1 r_code = returned_sqlstate , r_msg = message_text;
end;
#此处为实际调用的用户程序过程
call sp_unique(4);
end;
update t_event_history set endtime=now(3),issuccess=isnull(v_error),duration=timestampdiff(microsecond,starttime,now(3)), errormessage=concat('error=',r_code,', message=',r_msg),randno=null where starttime=v_starttime and randno=v_randno;
end
//
为了记录每个事件执行的时间，在事件定义中增加了操作日志表的逻辑，因为每个事件中只多执行了一条insert，一条update，4个事件总共多执行8条很简单的语句，对测试的影响可以忽略不计。执行时间精确到毫秒。
"htmlcode">
mysql -vvv -u root -p123456 test -e "truncate t_target;alter event ev1 on schedule at current_timestamp enable;alter event ev2 on schedule at current_timestamp enable;alter event ev3 on schedule at current_timestamp enable;alter event ev4 on schedule at current_timestamp enable;"
该命令行顺序触发了4个事件，但不会等前一个执行完才执行下一个，而是立即向下执行。这可从命令的输出可以清除看到：
[mysql@hdp2~]$mysql -vvv -u root -p123456 test -e "truncate t_target;alter event ev1 on schedule at current_timestamp enable;alter event ev2 on schedule at current_timestamp enable;alter event ev3 on schedule at current_timestamp enable;alter event ev4 on schedule at current_timestamp enable;" mysql: [Warning] Using a password on the command line interface can be insecure. -------------- truncate t_target -------------- Query OK, 0 rows affected (0.06 sec) -------------- alter event ev1 on schedule at current_timestamp enable -------------- Query OK, 0 rows affected (0.02 sec) -------------- alter event ev2 on schedule at current_timestamp enable -------------- Query OK, 0 rows affected (0.00 sec) -------------- alter event ev3 on schedule at current_timestamp enable -------------- Query OK, 0 rows affected (0.02 sec) -------------- alter event ev4 on schedule at current_timestamp enable -------------- Query OK, 0 rows affected (0.00 sec) Bye [mysql@hdp2~]$
"htmlcode">
mysql> select * from test.t_event_history; +--------+-----------+-------------------------+-------------------------+-----------+----------+--------------+--------+ | dbname | eventname | starttime | endtime | issuccess | duration | errormessage | randno | +--------+-----------+-------------------------+-------------------------+-----------+----------+--------------+--------+ | test | ev1 | 2019-07-31 14:38:04.000 | 2019-07-31 14:38:09.389 | 1 | 5389000 | NULL | NULL | | test | ev2 | 2019-07-31 14:38:04.000 | 2019-07-31 14:38:09.344 | 1 | 5344000 | NULL | NULL | | test | ev3 | 2019-07-31 14:38:05.000 | 2019-07-31 14:38:09.230 | 1 | 4230000 | NULL | NULL | | test | ev4 | 2019-07-31 14:38:05.000 | 2019-07-31 14:38:09.344 | 1 | 4344000 | NULL | NULL | +--------+-----------+-------------------------+-------------------------+-----------+----------+--------------+--------+ 4 rows in set (0.00 sec)
可以看到，每个过程的执行均为4.83秒，又因为是并行执行的，因此总的执行之间为最慢的5.3秒，优化效果和shell后台进程方式几乎相同。
总结
以上所述是小编给大家介绍的将MySQL去重操作优化到极致的操作方法,希望对大家有所帮助，如果大家有任何疑问请给我留言，小编会及时回复大家的。在此也非常感谢大家对网站的支持！
如果你觉得本文对你有帮助，欢迎转载，烦请注明出处，谢谢！
华山资源网 Design By www.eoogi.com
广告合作：本站广告合作请联系QQ：858582 申请时备注：广告合作（否则不回）
免责声明：本站资源来自互联网收集,仅供用于学习和交流,请遵循相关法律法规,本站一切资源不代表本站立场,如有侵权、后门、不妥请联系本站删除！
免责声明：本站资源来自互联网收集,仅供用于学习和交流,请遵循相关法律法规,本站一切资源不代表本站立场,如有侵权、后门、不妥请联系本站删除！
华山资源网 Design By www.eoogi.com
暂无评论...
一口气升级7个大模型SaaS应用，百度智能云：突出一个“开箱即用” - 2024/12/24
这一波大模型产业落地浪潮里，不少企业其实处在 “干瞪眼“的状态。
一种情况是，很多大模型产品看得见却摸不着，在台上一个个遥遥领先——今天Sora技精四座，明天英伟达的机器人又赢得满堂彩，可是到了台下一问：啥时候能用上啊？答曰：遥遥无期。
另一种情况是，企业想用上大模型，却又难免瞻前顾后——既要考虑场景融合，又得兼顾安全性，还要考虑打通现有系统，再加上各种部署成本和繁琐的采购流程……最后只能拂袖：罢了，再等等吧。
这一波大模型产业落地浪潮里，不少企业其实处在 “干瞪眼“的状态。
一种情况是，很多大模型产品看得见却摸不着，在台上一个个遥遥领先——今天Sora技精四座，明天英伟达的机器人又赢得满堂彩，可是到了台下一问：啥时候能用上啊？答曰：遥遥无期。
另一种情况是，企业想用上大模型，却又难免瞻前顾后——既要考虑场景融合，又得兼顾安全性，还要考虑打通现有系统，再加上各种部署成本和繁琐的采购流程……最后只能拂袖：罢了，再等等吧。
稳了！魔兽国服回归的3条重磅消息！官宣时间再确认！
昨天有一位朋友在大神群里分享，自己亚服账号被封号之后居然弹出了国服的封号信息对话框。
这里面让他访问的是一个国服的战网网址，com.cn和后面的zh都非常明白地表明这就是国服战网。
而他在复制这个网址并且进行登录之后，确实是网易的网址，也就是我们熟悉的停服之后国服发布的暴雪游戏产品运营到期开放退款的说明。这是一件比较奇怪的事情，因为以前都没有出现这样的情况，现在突然提示跳转到国服战网的网址，是不是说明了简体中文客户端已经开始进行更新了呢？
更新日志
2024年12月24日
2024年12月24日
- 小骆驼-《草原狼2(蓝光CD)》[原抓WAV+CUE]
- 群星《欢迎来到我身边 电影原声专辑》[320K/MP3][105.02MB]
- 群星《欢迎来到我身边 电影原声专辑》[FLAC/分轨][480.9MB]
- 雷婷《梦里蓝天HQⅡ》 2023头版限量编号低速原抓[WAV+CUE][463M]
- 群星《2024好听新歌42》AI调整音效【WAV分轨】
- 王思雨-《思念陪着鸿雁飞》WAV
- 王思雨《喜马拉雅HQ》头版限量编号[WAV+CUE]
- 李健《无时无刻》[WAV+CUE][590M]
- 陈奕迅《酝酿》[WAV分轨][502M]
- 卓依婷《化蝶》2CD[WAV+CUE][1.1G]
- 群星《吉他王(黑胶CD)》[WAV+CUE]
- 齐秦《穿乐(穿越)》[WAV+CUE]
- 发烧珍品《数位CD音响测试-动向效果（九）》【WAV+CUE】
- 邝美云《邝美云精装歌集》[DSF][1.6G]
- 吕方《爱一回伤一回》[WAV+CUE][454M]